Fire Door Blanks

Fire Door Blanks - completely flush no-frills fire safety doors. Equally fitting in both modern and period properties. To suit your interior design theme. The flush doors have a flat woodgrain surface. Also, they have matching hardwood lippings around all edges for final trimming. Choose from a range of finishes including Hardwood, Oak veneer or Walnut veneer.

With Online Door Store you do not need to compromise style for efficiency. These stylish modern doors give all the re-assurance you need that your building is safe. And meets the appropriate building regulations. Furthermore, your building control officer or architect may have specified fire doors for various areas of the property.  All our fire door blanks have either an FD30 rating or an FD60 rating. This for thirty minutes for sixty minutes barrier against the danger of fire. Each comes with its own certification.
Installation is all-important. Please see also our range of fire door linings/door frames and intumescent strips in accessories.

See our Blog and Help and Advice sections for further information. 





Product Type

Product Era



Fire Door




Showing all 7 results

We have a wide variety of patterns that will suit any interior design. The fire doors match their standard counterparts so that you do not have to have different designs in the same area of the house. Where needed, some ranges also have a glazed counterpart. Take a look at our range, we’re sure you will find just what you are looking for.

Why fit a Fire Door?

Modern building regulations are very strict on the use of fire doors in certain instances. It may be that your architect has stipulated a fire door in certain areas. It is always good practice to separate a room with a source of fire such as a stove, fireplace, oven or hob from other areas of the house. In this way, if an accident should occur, the fire door can provide your family with vital extra time to make their escape. Our fire doors are FD30 rated to give thirty minutes of time before they will burn through. FD60 sixty minute fire door blanks are also available.

What is their purpose?

Fire doors create a passive fire safety system, protecting both domestic and commercial buildings from the spread of fire by confining it to a specific area for a longer period of time. This allows people within the building enough time to escape via alternative routes which might otherwise be cut off by fire.

They are a legal requirement for particular buildings, including for flats and commercial properties, but the prime purpose for fire doors is to save lives and halt the progress of a destructive fire.

Selection and Installation

Installation of fire doors must be done correctly, please see our help and advice section for further information on this critical element.

The intumescent strip is just one of the key components in a fire door. Running around the edge where the door meets the door frame, it helps to trap the smoke, preventing it from spreading, as well as assisting in keeping flames from spreading beyond the door.

See our blog section for further advice on selection and installation
If you have any more questions please do not hesitate to give us a call on 01132 234898.