FD60 Door Lining Hardwood. Designed, tested and certified this Hardwood FD60 rated door lining set is perfect for any sixty minute FD 60 fire door.
The frame is rebated to accept fire doors of up to 45mm thickness and contains pre-cut grooves to install 15mm intumescent strips depending on the specification for your fire doors installation.
Available in two widths 108mm and 133mm, they are sized for 30″, 32″ and 33″ doors.
The maximum door height this frame can accommodate is 2015mm. Not suitable for metric sized doors. The frame is 32mm deep. You can trim the frame to the required height. The set comes as a pack of three.
This lining set does not include the intumescent strips. These are available separately and you will usually require 5 metres per door lining. This depends on the height and width of the door. Please do give us a call if you are unsure. The pre-cut groves measure 15mm wide by 4mm deep so please check the measurements of the intumescent strip you are using to ensure a good fit.
The Fire door lining hardwood set is supplied unfinished and is pre-sanded ready for finishing and installation.